The Model 880 Frequency Response Analyzer (FRA) Electrochemical Impedance Spectroscopy and High Frequency Resistance Measurements is available for integration with the Scribner's electronic load used in the 840 / 850 / 890 series of fuel cell test products. The 880 FRA meets or exceeds the performance and accuracy requirements needed for all fuel cell testing applications.

 

The 880 FRA and FuelCell® software facilitates continuous, single-frequency High Frequency Resistance (HFR) and full-frequency range Electrochemical Impedance Spectroscopy (EIS) analysis of an operating fuel cell. HFR can be performed concurrently with current interrupt (IR drop) measurement for orthogonal determination of the cell internal or ohmic resistance.

The 880 FRA can also be integrated with the Model 910 Multi-Channel Microelectrode Analyzer (MMA) for impedance spectroscopy of electrode and sensor arrays.

  • Generator Frequency Range                       1 mHz to10 kHz
  • Frequency Error                                         < 0.01%
  • Amplitude Range                                       ±10 mV to ±3.000 V
  • Amplitude Resolution                                 1 part in 32,768
  • Amplitude Error                                         < 1% ± 1 digit
  • Distortion                                                  < 0.02%
  • Analyzer Type                                           Quadrature method (digital correlation)
  • Input Ranges(RMS)                                    30 mV, 300 mV, 3 V RMS
  • Full Scale Peak Input                                  50 mV, 500 mV, 5 V
  • Cross Channel Isolation                              > 100 dB
  • Measurement Time, minimum:                    Longer of 1 cycle or 10 ms
  • Measurement Cycles:                                 Dependent on integration setting
  • Error Limits:                                              0.5% Magnitude error (1 mHz to 10 kHz) / 0.5 ° Phase error (1 mHz to 10 kHz)

850Emid890e-resize

Available in 840, 850e, 855 and 890e Multi Range Units

Integrated Impedance Measurement to 10 kHz

 

 

Download the 880 FRA Overview in PDF format.

 

 

Scribner Associates Inc.

Is a leading developer of high-quality instrumentation and software for the electrochemical research and development (R&D) community. Scribner Associates’ hardware and software products are used by academic, private and government laboratories in the areas of fuel cell development and evaluation, battery and redox flow cell technology, corrosion science and engineering, electrochemical sensors and multi-electrode arrays.

Read more

Contact Us

  150 East Connecticut Avenue
      Southern Pines, North Carolina, USA 28387

  +1-910-695-8884
  +1-910-695-8886
  info@scribner.com