Fuel Cell Testing Software

FuelCell logoFuelCell® is designed to control or monitor all of the parameters of an operating fuel cell and perform a wide variety of experiments.

 

 

FuelCell® Software

FuelCell® is a powerful, yet easy-to-learn software package for use with the Scribner Associates Series 840, 850, 855 and 890 Fuel Cell Test Systems.  FuelCell is technology independent and may be used with PEM FC, DMFC, PAFC, MCFC, or SOFC type fuel cells. 

FCViewTM is a powerful utility for analyzing, graphing and comparing data collected with FuelCell® and FlowCellTM. Basic modeling functions are also included.

Scribner Associates high-performance Fuel Cell Test Systems are designed to meet all of your research and development needs. Low resistance electronic loads, coupled with the FuelCell software package, allow precise computer control and monitoring of all operation parameters. 

FuelCell-exp

Control and Measure:

  • Current
  • Voltage
  • Power
  • Fuel and Oxidant Flow
  • Temperature and Dew Point

 

Real-time Measurement and Graphing of Cell Properties:

  • Display Data using a wide variety of axis formats
  • Polarization Curves - cell voltage vs. current density and power density
  • iR-drop and cell resistance by current interrupt
  • iR-free voltage and Tafel slope
  • Half-cell potential vs. reference electrode
  • Electrochemical Impedance Spectroscopy (EIS) & High Frequency Resistance (HFR) with 880 FRA
  • Total voltage and average cell voltage for stacks

 

Features:

  • Compatible with Windows 7/8/10
  • Setup and control all features of the Scribner Associates fuel cell test equipment FuelCell Setup Fuel Window
  • Control the purge and fuel gas stream type, flow rate and stoichiometry, humidification and RH
  • Scale fuel cell parameters for area, current, voltage, power, and number of cells
  • Apply and control a current, voltage, or power load on the fuel cell under test
  • Monitor performance over a wide range of time intervals
  • Display data using a wide variety of axis formats
  • Assess fuel cell performance through cell resistance and Tafel slope measurement
  • Apply a controlled load sequence to a cell to simulate varying operating conditions
  • Built-in Potentiostat experiments for integrated 885 PStat
  • Inegral control of 885 PStat, Inlet Gas Switching, and Humidification Bypass
  • Pressure control with Auto Back Pressure Unit
  • Gas switching with Auto MultiGas and humidification bypass (wet/dry)
  • Additional temperature and voltage data with 892e Data Expansion System
  • Reformate simulation, gas mixing and impurities control
  • Mass Flow Controllers for gas reactants and pumps for liquid reactants
  • Stoichiometric and other flow rate control methods
  • Temperature Ramping
  • Manage and control alarms
  • Easily create sophisticated experimental routines
  • Fully-automated swithing between standard fuel cell operation and diagnostics such as crossover and electrochemical surface area (ECSA)

 

Download FuelCell and FCView 

Scribner Associates Inc.

Is a leading developer of high-quality instrumentation and software for the electrochemical research and development (R&D) community. Scribner Associates’ hardware and software products are used by academic, private and government laboratories in the areas of fuel cell development and evaluation, battery and redox flow cell technology, corrosion science and engineering, electrochemical sensors and multi-electrode arrays.

Read more

Contact Us

  150 East Connecticut Avenue
      Southern Pines, North Carolina, USA 28387

  +1-910-695-8884
  +1-910-695-8886
  info@scribner.com